voxl-gpio not working as expected
I have tried all the listed GPIO pins exposed on connectors J7, J10, J11 and J12.
Why can't I write to a GPIO pin?
When you execute
voxl-gpio write, it configures the desired pin to OUTPUT mode and sets the desired state (0=low or 1=high). When you execute
voxl-gpio read, the pin is configured as INPUT with a pull-up, so any previous pin state is no longer applicable. If nothing is connected to the pin while it is configured as INPUT, it will read 1 due to the pull-up.
If you would like to test the pin
writefunctionality, you could set up a loop back connection, where you connect two pins together and you write one pin and read another.
I hope this helps
Great, thanks for the info. I suspected something along those lines.