VOXL PWM AUX output not working
-
Hello,
I'm currently trying to connect a servo to test PWM output on AUX1 and nothing seems to work to get any real output to the servo. I have supplied it with 5v power and currently have RC_MAP_AUX1 set to Channel 5. And I have the servo signal wire connected to pin 5 on the PWM breakout board from plug J1007. I assume I'm doing something wrong and hopefully someone can point it out to me, thank you!!
-
Hi @Cole-Mathieu ,
We have a little bit of documentation here with respect to AUX outputs. The FlightCore form factor only has the 8 PWM outputs, so it's a little limited, but we've used it to control a two channel gimbal:
https://docs.modalai.com/voxl-m500-gimbal-user-guide/#auxillary-outputs
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login