Parts needed to add M0178 ToF sensor to Starling 2 Max - C28 configuration

[Timothy Zinwota]

Hello ModalAI team,

We are working with a ModalAI Starling 2 Max drone, and we would like to add the M0178 VOXL 2 Time of Flight depth sensor to the drone.

Drone SKU: MRB-D0012-4-V3-C28-M11-T9-K3

Current configuration: C28 — Dual 4K and Dual Tracking cameras, with Microhard pMDDL2450 and Ghost Atto 2.4GHz.

Product link:
https://www.modalai.com/products/m0178?variant=48528287793456

Could you please confirm:

1. Is the M0178 ToF sensor compatible with our Starling 2 Max configuration?

2. What parts do we need to add the TOF sensor to our assembly?

We would like to place an order as soon as possible. Thank you for your help.

Best regards,
Timothy Zinwota
University of Nevada, Las Vegas

[Adrian Hidalgo]

Hello Timothy,

Excellent! That is certainly possible to do.

1. Yes, with some configuration it can be compatible. You will need to reconfigure MPA from the C28 camera config to the C29 camera config.

2. They will need a new front camera bezel(M10001278), TOF safety shield(M10000537) and everything in MSU-M0178-1-01. Most of the hardware can be reused but as a precaution would also recommend QTY. 4 M10000884(M1.6X6 Screws) & QTY. 4 M10000882(M2.2X10 Screws).

If you would like to proceed with the purchase, please email contact@modalai.com with the contents above.

Regards.

[Timothy Zinwota]

This post is deleted!