ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    adding payload to max2?

    Scheduled Pinned Locked Moved Ask your questions right here!
    4 Posts 3 Posters 268 Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Maya BokerM Offline
      Maya Boker
      last edited by Maya Boker

      Hi,

      I am considering adding a small electronics payload enclosed in a 3D-printed case, with a total weight of approximately 250 g, to the Starling 2 Max.

      Would this require any additional configuration, tuning, calibration, or other steps to ensure stable and safe flight? Are there any payload weight distribution or mounting considerations I should be aware of?

      Thank you.

      Alex KushleyevA 1 Reply Last reply Reply Quote 0
      • Alex KushleyevA Offline
        Alex Kushleyev ModalAI Team @Maya Boker
        last edited by

        @Maya-Boker , please see a discussion regarding flight time vs added payload to Starling 2 Max. https://forum.modalai.com/topic/3732/starling-2-max-payload-capacity-and-flight-time-impact

        Considering that you would be increasing the mass by 50% in your case (quite substantial), I imagine some flight controller tuning would be required (no ESC tuning needed).

        Any new mass should be mounted as close as possible to the geometrical center of the drone in order to reduce the added moment of inertia. Off-center mass will not only have greater impact on the moment of inertia, it will also make the vehicle imbalanced at hover and even more so during accelerations.

        You will probably need to perform or at least check the Attitude Controller tuning, and Height Controller tuning (due to increased mass). Please consult the PX4 tuning guide(s) for this, as we do not offer any additional information on that topic. You should be able to use a stock Starling 2 Max tune and make adjustments. If adding 250g does not work well, try a smaller weight increase with a dummy weight and see what tuning parameters you need to change to make it work well again (and then go from there).

        Alex

        1 Reply Last reply Reply Quote 0
        • Ebenezer AfrifaE Offline
          Ebenezer Afrifa
          last edited by

          I am very interested in getting the VOXL 2 Starling Drone but I saw that it is only capable for a payload of 500g. Is there way I can modify it to be capable of 3 to 4 pounds (approximately 1.36 to 1.81 kg) of payload?

          Alex KushleyevA 1 Reply Last reply Reply Quote 0
          • Alex KushleyevA Offline
            Alex Kushleyev ModalAI Team @Ebenezer Afrifa
            last edited by

            @Ebenezer-Afrifa , sorry, but Starling 2 Max is not capable of carrying such a large payload. We currently do not offer any platforms capable of carrying 3-4 pounds.

            Alex

            1 Reply Last reply Reply Quote 0

            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

            With your input, this post could be even better 💗

            Register Login
            • First post
              Last post
            Powered by NodeBB | Contributors