Failing to boot
-
I was using the voxl2 on my starling 2 drone out in the sun for a few hours on a ~80 F day. Commands which would normally be responsive like ros2 topic echoing, etc. were taking a long time to output any text so I thought it might be overheating and powered it off.
A few days later I tried turning it on and it doesn't boot up. I can't connect over adb shell. I get the following output from dmesg when plugging it in:
[31549.649340] usb 1-9: new high-speed USB device number 15 using xhci_hcd
[31549.800919] usb 1-9: New USB device found, idVendor=05c6, idProduct=900e, bcdDevice= 0.00
[31549.800933] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31549.800937] usb 1-9: Product: QUSB_BULK_SN:C67DF5D4
[31549.800941] usb 1-9: Manufacturer: Qualcomm CDMA Technologies MSM
[31549.800944] usb 1-9: SerialNumber: 22d3828I see this in lsusb
Bus 001 Device 015: ID 05c6:900e Qualcomm, Inc. QUSB_BULK_SN:C67DF5D4
fastboot devices doesn't list anything.
Is there a way to fix or debug this? Thank you.
-
I was using the voxl2 on my starling 2 drone out in the sun for a few hours on a ~80 F day. Commands which would normally be responsive like ros2 topic echoing, etc. were taking a long time to output any text so I thought it might be overheating and powered it off.
A few days later I tried turning it on and it doesn't boot up. I can't connect over adb shell. I get the following output from dmesg when plugging it in:
[31549.649340] usb 1-9: new high-speed USB device number 15 using xhci_hcd
[31549.800919] usb 1-9: New USB device found, idVendor=05c6, idProduct=900e, bcdDevice= 0.00
[31549.800933] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31549.800937] usb 1-9: Product: QUSB_BULK_SN:C67DF5D4
[31549.800941] usb 1-9: Manufacturer: Qualcomm CDMA Technologies MSM
[31549.800944] usb 1-9: SerialNumber: 22d3828I see this in lsusb
Bus 001 Device 015: ID 05c6:900e Qualcomm, Inc. QUSB_BULK_SN:C67DF5D4
fastboot devices doesn't list anything.
Is there a way to fix or debug this? Thank you.
@John-Keller , please try https://docs.modalai.com/voxl2-unbricking/
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login