Using J18 for expander I/O Board
-
The VOXL2 I/O Board is meant to connect to J19, but I am using both channels on this connector for other peripherals. Does anyone know if J18 can be used for this? I am planning to use this expander board for controlling some generic PWM ESCs and servos. Thanks!
-
The VOXL2 I/O Board is meant to connect to J19, but I am using both channels on this connector for other peripherals. Does anyone know if J18 can be used for this? I am planning to use this expander board for controlling some generic PWM ESCs and servos. Thanks!
@magnetocircuit Yes, this is supported. In the config file for px4
/etc/modalai/voxl-px4.confsetESC=VOXL2_IO_PWM_ESC.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login