Using J18 for expander I/O Board
-
The VOXL2 I/O Board is meant to connect to J19, but I am using both channels on this connector for other peripherals. Does anyone know if J18 can be used for this? I am planning to use this expander board for controlling some generic PWM ESCs and servos. Thanks!
-
The VOXL2 I/O Board is meant to connect to J19, but I am using both channels on this connector for other peripherals. Does anyone know if J18 can be used for this? I am planning to use this expander board for controlling some generic PWM ESCs and servos. Thanks!
@magnetocircuit Yes, this is supported. In the config file for px4
/etc/modalai/voxl-px4.confsetESC=VOXL2_IO_PWM_ESC.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login