Quectel-CM error when Initializing a connection (SDK 1.5.0)

[Matthew Wellner]

Hi!

I just updated to the newest VOXL SDK (1.5.0) to get support for the Hadron and Boson cameras and after the flash my Quectel 5G modem will no longer get an IP address from the cellular network. I ran through voxl-configure-modem again and I also ran the voxel-modem-start command manually. When I run voxel-modem-start manually, I get this error:

qrb5165 based hardware detected...
\Setting mode preference to LTE / 5G
AT+QNWPREFCFG="mode_pref",LTE:NR5G
OK

Initalizing cellular connection...
/usr/bin/voxl-modem-start: line 84: /usr/bin/quectel-CM: cannot execute binary file: Exec format error
/usr/bin/voxl-modem-start: line 84: /usr/bin/quectel-CM: cannot execute binary file: Exec format error
/usr/bin/voxl-modem-start: line 84: /usr/bin/quectel-CM: cannot execute binary file: Exec format error

If I run "file /usr/bin/quectel-CM", I get this:

/usr/bin/quectel-CM: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=22bb006a724be58f44e4eb6b7ed46f859144f314, for GNU/Linux 3.2.0, stripped

Isn't this supposed to be "ARM aarch64"? I'm going to try copying the quectel-CM from a previous release to see if that fixes my issue, but let me know.

[Matthew Wellner]

I grabbed the /usr/bin/quectel-CM from another VOXL2 on an older SDK (1.4.1) and swapped out the one that came with 1.5.0 and everything is working again...