Need 2 GPI interrupt inputs on VOXL 2 Mini
-
Hello,
We are designing a system that needs to respond to two external digital signals, ideally generating an interrupt. J10:7 PGIO_64 is designated for interrupt, but I don't see a second such designated pin. In a separate post I see mention of GPI_46 on some versions of the VOXL 2, but nothing for the Mini. Can I configured GPI_46 to generate an interrupt in the VOXL 2 Mini? Or other recommendations?
-
Hello,
We are designing a system that needs to respond to two external digital signals, ideally generating an interrupt. J10:7 PGIO_64 is designated for interrupt, but I don't see a second such designated pin. In a separate post I see mention of GPI_46 on some versions of the VOXL 2, but nothing for the Mini. Can I configured GPI_46 to generate an interrupt in the VOXL 2 Mini? Or other recommendations?
Hi @dougmiller
If your VOXL 2 Mini is TrustZone Configured for UART over J10, then yes, there are 2 pins available as inputs.
https://docs.modalai.com/voxl2-mini-connectors/#j10---external-uart
You can see GPIO_40, GPIO_46 and GPIO_64 are input capable.
GPIO_40 and GPIO_64 are able to be configured to do wake events in the SoC so they have extra configuration to route to a power manager. Depending on how you write your IRQ routine, that may or may not help.
Hope this helps!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login