VOXL FPV ESC Not Being detected (VOXL 2 SDK 1.4.1)
-
Hello,
Currently troubleshooting some issues with the FPV ESC not being detected when using voxl-esc scan and voxl-esc detect. The FPV ESC is receiving battery power, powering the VOXL 2 as expected, and its LED pattern shows nothing out of the ordinary. Here is the output from voxl-esc scan and voxl-esc detect.
-
Hello,
Currently troubleshooting some issues with the FPV ESC not being detected when using voxl-esc scan and voxl-esc detect. The FPV ESC is receiving battery power, powering the VOXL 2 as expected, and its LED pattern shows nothing out of the ordinary. Here is the output from voxl-esc scan and voxl-esc detect.
@Jeremy-Frederick , please check the following:
- try explicitly stopping PX4 before scanning for the ESC using
voxl-escpython tools :systemctl stop voxl-px4 - try another 4-pin uart cable, if available
- test another ESC the same way, if available
Was this ESC + board combination working before at stopped working?
Alex
- try explicitly stopping PX4 before scanning for the ESC using
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login