VOXL FPV ESC Not Being detected (VOXL 2 SDK 1.4.1)
-
Hello,
Currently troubleshooting some issues with the FPV ESC not being detected when using voxl-esc scan and voxl-esc detect. The FPV ESC is receiving battery power, powering the VOXL 2 as expected, and its LED pattern shows nothing out of the ordinary. Here is the output from voxl-esc scan and voxl-esc detect.
-
Hello,
Currently troubleshooting some issues with the FPV ESC not being detected when using voxl-esc scan and voxl-esc detect. The FPV ESC is receiving battery power, powering the VOXL 2 as expected, and its LED pattern shows nothing out of the ordinary. Here is the output from voxl-esc scan and voxl-esc detect.
@Jeremy-Frederick , please check the following:
- try explicitly stopping PX4 before scanning for the ESC using
voxl-escpython tools :systemctl stop voxl-px4 - try another 4-pin uart cable, if available
- test another ESC the same way, if available
Was this ESC + board combination working before at stopped working?
Alex
- try explicitly stopping PX4 before scanning for the ESC using
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login