Soft-Reboot not working
-
Hey,
my VOXL is behaving strangely in that whenever I initiate a reboot from QGroundControl, regardless of connection type, the whole VOXL Flight just powers off (consumes 0.25A as seen on my power supply), disconnects and all LEDs turn off.
Weirdly enough the LEDs on two external devices keep blinking.Same behaviour with all external devices detached.
So I have to go and unplug/ replug the Quad every time I change a parameter that requires reboot... Any ideas?
cheers -
Hi @m4v3r ,
The 'reboot' command from QGC (should) only reset the STM32 micro processor so that's a bit odd.
If you have VOXL connected via ADB and issue a reboot command via QGC, do you lose the ADB connection?
The 'reboot' command does make the QGC connection drop out momentarily normally.
-
Hi @m4v3r ,
The 'reboot' command from QGC (should) only reset the STM32 micro processor so that's a bit odd.
If you have VOXL connected via ADB and issue a reboot command via QGC, do you lose the ADB connection?
The 'reboot' command does make the QGC connection drop out momentarily normally.
@modaltb said in Soft-Reboot not working:
Hi @m4v3r ,
If you have VOXL connected via ADB and issue a reboot command via QGC, do you lose the ADB connection?
Hi, yes if it's rebooted in ADB it's the same behavior.
This particular VOXL did live through several crashes and stuff though (I am a test-pilot mainly afterall ... ;D) so it might just be busted.A different one, setup exactly the same, behaves as expected.
Thanks for the insight though.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login