External MAVLink Connection using VOXL 2 through ttyHS1
-
I'm looking to establish an external MAVLink connection to the voxl-px4 service on VOXL 2 through the ttyHS1 of the USB3 expansion board. I'm looking to integrate a third party RemoteID module, and am not implementing an external flight controller.
All the documentation and questions on the forum I could find seem to reference an external flight controller use case, or an internal MAVROS/MAVSDK use case. How do I go about configuring the mavlink-server to output MAVLink on this external UART while maintaining the VOXL 2's PX4 capability.
-
@Jeremy-Frederick said in External MAVLink Connection using VOXL 2 through ttyHS1:
I'm looking to establish an external MAVLink connection to the voxl-px4 service on VOXL 2 through the ttyHS1 of the USB3 expansion board. I'm looking to integrate a third party RemoteID module, and am not implementing an external flight controller.
@Jeremy-Frederick voxl-mavlink-server is meant to act similar to mavlink-router where it can route traffic (two way comms) between a specific port or hardline. How are you connecting to your remoteID module? Over the UART I would presume as that is the only way to send those packets. If you are using the USB3.0 port instead then you will need to either edit voxl-mavlink-server or create a mavlink-router to route the traffic to that port.
A bit more information on your setup would be great!
Zach -
@Jeremy-Frederick said in External MAVLink Connection using VOXL 2 through ttyHS1:
I'm looking to establish an external MAVLink connection to the voxl-px4 service on VOXL 2 through the ttyHS1 of the USB3 expansion board. I'm looking to integrate a third party RemoteID module, and am not implementing an external flight controller.
@Jeremy-Frederick voxl-mavlink-server is meant to act similar to mavlink-router where it can route traffic (two way comms) between a specific port or hardline. How are you connecting to your remoteID module? Over the UART I would presume as that is the only way to send those packets. If you are using the USB3.0 port instead then you will need to either edit voxl-mavlink-server or create a mavlink-router to route the traffic to that port.
A bit more information on your setup would be great!
Zach@Zachary-Lowell-0 I'm attempting to communicate through the UART ttyHS1 that is made available on the USB expansion board.
-
@Zachary-Lowell-0 I'm attempting to communicate through the UART ttyHS1 that is made available on the USB expansion board.
@Jeremy-Frederick Without going through the voxl-mavlink-server source code in detail I'm pretty sure that what you want to do is not currently supported. So, some new functionality will likely need to be added to voxl-mavlink-server. What third party unit are you trying to integrate with? Does it require bi-directional traffic or does it just send out packets and not expect to receive anything?
-
@Jeremy-Frederick Without going through the voxl-mavlink-server source code in detail I'm pretty sure that what you want to do is not currently supported. So, some new functionality will likely need to be added to voxl-mavlink-server. What third party unit are you trying to integrate with? Does it require bi-directional traffic or does it just send out packets and not expect to receive anything?
@Eric-Katzfey Dronetag DRI, It expects to accept MAVLink data from the flight controller.
-
@Eric-Katzfey Dronetag DRI, It expects to accept MAVLink data from the flight controller.
@Jeremy-Frederick Okay, well then you will need to add support for such an external Mavlink enabled peripheral into voxl-mavlink-server. We don't currently support that.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login