M0062 VOXL 2 Ethernet Expansion and USB Hub Missing User Guide
-
Hi,
We wanted to start using the ethernet expansion board for the SD card slot and additional USB ports. But I notice there is nothing written in the user guide (link). Namely we're curious how we should be setting the switches in the SW1 component, among other uncertainties which can arise when we begin to use the product.
-
Hi,
We wanted to start using the ethernet expansion board for the SD card slot and additional USB ports. But I notice there is nothing written in the user guide (link). Namely we're curious how we should be setting the switches in the SW1 component, among other uncertainties which can arise when we begin to use the product.
@Morten-Nissov The switches can be left in the default state they're shipped, they're mainly used for booting the board into various modes for one time factory flash. As for any additional questions that may arise they can be addressed here and the documentation can be updated to fill in the blanks.
-
@Morten-Nissov The switches can be left in the default state they're shipped, they're mainly used for booting the board into various modes for one time factory flash. As for any additional questions that may arise they can be addressed here and the documentation can be updated to fill in the blanks.
@tom Sorry about that, I thought I had answered this.
Would you be able to tell me what the default state is? I really can't recall if they've been moved since we got it.
-
@tom Sorry about that, I thought I had answered this.
Would you be able to tell me what the default state is? I really can't recall if they've been moved since we got it.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login