Flash Flat Build Fails in QDL recovery steps
-
I'm trying to unbrick a VOXL 2 that has gone into EDL mode (Reading as QUAL_BULK). I've got the system into QDL mode and it is being read as (QDL MODE). No issues provisioning or flashing CDT.
Once I get to the Flash Flat Build stage, the system immediately sends the following failure {"message": "Flash flat build failed\n"}. I've tried on a Virtual Machine and on a dedicated Linux PC. Any thoughts as to why it may be failing?
Flash Flat Build: 2024-06-17-1.7.4-M0054-1
VOXL2: QRB 5165M
-
I'm trying to unbrick a VOXL 2 that has gone into EDL mode (Reading as QUAL_BULK). I've got the system into QDL mode and it is being read as (QDL MODE). No issues provisioning or flashing CDT.
Once I get to the Flash Flat Build stage, the system immediately sends the following failure {"message": "Flash flat build failed\n"}. I've tried on a Virtual Machine and on a dedicated Linux PC. Any thoughts as to why it may be failing?
Flash Flat Build: 2024-06-17-1.7.4-M0054-1
VOXL2: QRB 5165M
@swickliff I am using Ubuntu 20.04 on both the VM and Linux PC
-
@yardy Folks recover using that tool all of the time. When it doesn't work, it's due to hardware damage. Often from ESD, or simply crashing the drone. See https://modalai.com/handling
-
@yardy Folks recover using that tool all of the time. When it doesn't work, it's due to hardware damage. Often from ESD, or simply crashing the drone. See https://modalai.com/handling
This post is deleted!
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login