Cant Connect to Q Ground Control after SDK Update
-
I recently updated the Voxl SDK on my Modal M500 from 0.9.5 to 1.2.0, and now the aircraft won't connect to Q Ground Control. When I open Q Ground Control, it says disconnected. The aircraft still connects to my laptop via wifi and I can SSH into the aircraft from a terminal.
-
I recently updated the Voxl SDK on my Modal M500 from 0.9.5 to 1.2.0, and now the aircraft won't connect to Q Ground Control. When I open Q Ground Control, it says disconnected. The aircraft still connects to my laptop via wifi and I can SSH into the aircraft from a terminal.
@Samuel-Bryan Are you using SoftAP mode in WiFi (e.g. The drone WiFi is the access point) or are you using station mode (e.g. where your laptop and drone connect to an external router)?
-
@Samuel-Bryan Are you using SoftAP mode in WiFi (e.g. The drone WiFi is the access point) or are you using station mode (e.g. where your laptop and drone connect to an external router)?
@Eric-Katzfey I am using SoftAP mode in Wifi.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login