Unable to see rostopics published by mpatoros2 foxy in my humble docker container
-
Pretty much what the topic line says
@Darshit-Desai Hi, wondering if you were able to solve this.
-
@Darshit-Desai are your ROS_ID's the same between the docker and disk? If not how are you sharing the interfaces into the ros docker instance?
If it is easier you can just share the /opt/ros/foxy/mpa_to_ros2 directory as a volume as well as the /run/mpa directory as a volume and run the ros2 node in the docker instance. The other thing to note is I am unsure if there is compatibility between foxy and humble in terms of the nodes or if there are some internal conflicts happening behind the scenes.
Zach
-
@Darshit-Desai are your ROS_ID's the same between the docker and disk? If not how are you sharing the interfaces into the ros docker instance?
If it is easier you can just share the /opt/ros/foxy/mpa_to_ros2 directory as a volume as well as the /run/mpa directory as a volume and run the ros2 node in the docker instance. The other thing to note is I am unsure if there is compatibility between foxy and humble in terms of the nodes or if there are some internal conflicts happening behind the scenes.
Zach
@Zachary-Lowell-0 I am not sure how I resolved this, but as far as I remember there was px4_msgs versioning issue where I wasn't using either the correct ones or something
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login