Connecting USB 2.0 device on VOXL2 USB3 UART Add-on board
-
Hello community,
I am working on VOXL2 with SDK 1.1.3 and for connecting radio Doodle labs I am using Microhard add-on board with USB connectors. I want to shift onto VOXL2 USB3 UART expansion board but as I can see in its datasheet the JST 10 pin USB connector has multiple pins then just D+,D- and ground as that on USB 2.0 connectors on Microhard add-on board. Can someone guide me how can I map D+,D- and ground pins on 10 pin JST USB3 connector of this expansion board? -
Hello community,
I am working on VOXL2 with SDK 1.1.3 and for connecting radio Doodle labs I am using Microhard add-on board with USB connectors. I want to shift onto VOXL2 USB3 UART expansion board but as I can see in its datasheet the JST 10 pin USB connector has multiple pins then just D+,D- and ground as that on USB 2.0 connectors on Microhard add-on board. Can someone guide me how can I map D+,D- and ground pins on 10 pin JST USB3 connector of this expansion board?@Aaky you could use MCBL-00085 as a reference https://docs.modalai.com/cable-datasheets/#mcbl-00085
-
@Aaky you could use MCBL-00085 as a reference https://docs.modalai.com/cable-datasheets/#mcbl-00085
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login