Connecting USB 2.0 device on VOXL2 USB3 UART Add-on board
-
Hello community,
I am working on VOXL2 with SDK 1.1.3 and for connecting radio Doodle labs I am using Microhard add-on board with USB connectors. I want to shift onto VOXL2 USB3 UART expansion board but as I can see in its datasheet the JST 10 pin USB connector has multiple pins then just D+,D- and ground as that on USB 2.0 connectors on Microhard add-on board. Can someone guide me how can I map D+,D- and ground pins on 10 pin JST USB3 connector of this expansion board? -
Hello community,
I am working on VOXL2 with SDK 1.1.3 and for connecting radio Doodle labs I am using Microhard add-on board with USB connectors. I want to shift onto VOXL2 USB3 UART expansion board but as I can see in its datasheet the JST 10 pin USB connector has multiple pins then just D+,D- and ground as that on USB 2.0 connectors on Microhard add-on board. Can someone guide me how can I map D+,D- and ground pins on 10 pin JST USB3 connector of this expansion board?@Aaky you could use MCBL-00085 as a reference https://docs.modalai.com/cable-datasheets/#mcbl-00085
-
@Aaky you could use MCBL-00085 as a reference https://docs.modalai.com/cable-datasheets/#mcbl-00085
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login