Random Reboot issue while voxl-streamer is running
-
When running our algorithm or doing voxl-streamer while connected to a microhard, the drone is experiencing a random reboot. This issue is difficult to see when connected via wifi (station mode). When the drone reboots, it is disconnected from qgc and reconnected to qgc about 1 minute later. I think they had the same problem, can you tell me how they solved it?
We are using 1.1.2 sdk. And Microhard is pMDDL G2
-
When running our algorithm or doing voxl-streamer while connected to a microhard, the drone is experiencing a random reboot. This issue is difficult to see when connected via wifi (station mode). When the drone reboots, it is disconnected from qgc and reconnected to qgc about 1 minute later. I think they had the same problem, can you tell me how they solved it?
We are using 1.1.2 sdk. And Microhard is pMDDL G2
@Inhan-Kang while on the ground, can you place a fan near by? you are likely overheating. In the air, you should be fine
-
@Inhan-Kang while on the ground, can you place a fan near by? you are likely overheating. In the air, you should be fine
@Moderator I checked voxl-inspect-cpu and it looks fine.
-
@Moderator I checked voxl-inspect-cpu and it looks fine.
@Inhan-Kang Did you ever resolve this issue? We may have a similar one. Ruled out power issues already by running straight off a powerful 5V supply. It does not reboot though, just goes dark and stops responding over ADB or over the network (we are using Doodle).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login