ESC Calibration Error Voxl2
-
-
[[topic:post-is-deleted]]
@AP123
Same question here,
Did you solve the this?
-
@AP123
Same question here,
Did you solve the this?
@Abdullah01 , the original issue was that ESC calibration was actually done without propellers mounted, you can see the current at 94% power was very small, 0.4A
However, the script still produced the a0, a1, a2 parameters (which would have been wrong to use because calibration was done without a propeller..)
The error at the end was a result of attempted plot - since voxl2 does not have a display attached, the plot failed. Since that version, we have transitioned to using
plotlyfor plotting, and calibration plots are saved to disk in addition to attempt to plot it to display. The plot feature was updated after SDK 1.1.2 release, but you can get it directly from gitlab here : https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-esc/-/blob/dev/voxl-esc-tools/voxl-esc-calibrate.py (just get the wholevoxl-escrepo from dev branch on your voxl2 and run the calibration procedure).Meanwhile, we will add additional checking of the calibration to catch the conditions that do not look like proper calibration (when propeller is not mounted, etc..).
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login