Seeker SLAM Setup Help
-
I am using the Seeker SLAM Drone. I have been working very hard to get it setup for its first flight. But I am facing a few problems that I'm unable to solve.
After I get a GPS lock, I am trying to bind it to my transmitter which is failing (Spektrum DX 6e). I have tried youtube videos and guides which have not worked. It says "Bind Failed".
Also, the drone's camera server shuts down automatically after a few minutes of turning it on. I read about overheating issues so I put a fan on it and it still stops working after sometime. The VOXL version on the drone is 0.9.4
As of now, I'd like to bind the drone to the transmitter so that I can try flying it indoors. Please suggest any solutions/guides. Thankyou!
-
I am using the Seeker SLAM Drone. I have been working very hard to get it setup for its first flight. But I am facing a few problems that I'm unable to solve.
After I get a GPS lock, I am trying to bind it to my transmitter which is failing (Spektrum DX 6e). I have tried youtube videos and guides which have not worked. It says "Bind Failed".
Also, the drone's camera server shuts down automatically after a few minutes of turning it on. I read about overheating issues so I put a fan on it and it still stops working after sometime. The VOXL version on the drone is 0.9.4
As of now, I'd like to bind the drone to the transmitter so that I can try flying it indoors. Please suggest any solutions/guides. Thankyou!
-
@utari_ais That SDK version is quite old at this point, I'd recommend upgrading to the newly released SDK 1.1.0 as well as PX4 v1.14 and latest params on the flight core
-
@tom I've begun the process to flash the new SDK on the drone. Is there an estimate of how long it takes? I have it running for about an hour now but there have been no updates. I'm flashing the VOXL 2 (QRB5165) SDK. Thanks.
-
@utari_ais It takes a couple minutes and provides output along the way. What are you seeing?
-
It has been here since I pressed 1 an hour ago. I confirmed that the computer does in fact see the drone with the "adb devices" command.
-
@utari_ais Are you using a seeker? If so you need to flash the voxl1 release, not voxl2
-
@utari_ais You should be able to just ctrl-C or exit the terminal
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login