Unreliable ADB shell connection with M0054 board
-
Hello,
I have the Voxl2 M0054 Dev Kit (No cameras). (Link)
I am trying to access the board through ADB shell.
I have triple checked my connections and port. But the board is not always recognized as an ADB device. It randomly is recognized on powering on-off multiple times.Also am not able to connect to the ADB every time when the USB expansion board is connected to the board(expansion board).
(Have not done any major changes to think that voxl2 bricked)
Kindly help resolve this uncertainty.Thanks
-
Hello,
I have the Voxl2 M0054 Dev Kit (No cameras). (Link)
I am trying to access the board through ADB shell.
I have triple checked my connections and port. But the board is not always recognized as an ADB device. It randomly is recognized on powering on-off multiple times.Also am not able to connect to the ADB every time when the USB expansion board is connected to the board(expansion board).
(Have not done any major changes to think that voxl2 bricked)
Kindly help resolve this uncertainty.Thanks
-
@turtle We've seen this when there is a faulty MCBL-0001 https://docs.modalai.com/cable-datasheets/#mcbl-00001 which causes the voxl2 to power cycle. Do you have another cable you can swap it and test with?
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login