I/O board with 1.0.0 SDK
-
Hello,
I want to ask regarding the new SDK (1.0.0). Is is supporting the I/O board?
Because I just updated voxl2 to 1.0.0, and there is no communication between the I/O board's components (RC and PWM ESCs) and Voxl.
does anyone has this issue?
thank you
-
Hello,
I want to ask regarding the new SDK (1.0.0). Is is supporting the I/O board?
Because I just updated voxl2 to 1.0.0, and there is no communication between the I/O board's components (RC and PWM ESCs) and Voxl.
does anyone has this issue?
thank you
@Abdullah01 No, SDK 1.0.0 is not compatible with the I/O board. An update will be coming in the next couple of weeks to allow use of the I/O board for SBUS RC only followed by another update later to add PWM.
-
@Abdullah01 No, SDK 1.0.0 is not compatible with the I/O board. An update will be coming in the next couple of weeks to allow use of the I/O board for SBUS RC only followed by another update later to add PWM.
-
@Abdullah01 Yes, ESC should be fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login