I/O board with 1.0.0 SDK
-
Hello,
I want to ask regarding the new SDK (1.0.0). Is is supporting the I/O board?
Because I just updated voxl2 to 1.0.0, and there is no communication between the I/O board's components (RC and PWM ESCs) and Voxl.
does anyone has this issue?
thank you
-
Hello,
I want to ask regarding the new SDK (1.0.0). Is is supporting the I/O board?
Because I just updated voxl2 to 1.0.0, and there is no communication between the I/O board's components (RC and PWM ESCs) and Voxl.
does anyone has this issue?
thank you
@Abdullah01 No, SDK 1.0.0 is not compatible with the I/O board. An update will be coming in the next couple of weeks to allow use of the I/O board for SBUS RC only followed by another update later to add PWM.
-
@Abdullah01 No, SDK 1.0.0 is not compatible with the I/O board. An update will be coming in the next couple of weeks to allow use of the I/O board for SBUS RC only followed by another update later to add PWM.
-
@Abdullah01 Yes, ESC should be fine.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login