Changes regarding px4 commands
-
Heya!
So, I used to rock VOXL2 with the old 0.9.4 Suite. But then I upgraded to the fancy new 1.0.0 Suite. Now I'm trying to figure out how to connect to QGC. Any ideas?
Cheers.@RiveraDn In general, I'd run through the following to get you to what you're used to:
# choose which sku best matches your hardware setup voxl-configure-sku -w # start all services based on the sku you chose in step 1. voxl-configure-mpa # modify voxl-mavlink-server's config file to point to your qgc_ip vi /etc/modalai/voxl-mavlink-server.conf # reboot or power cycle adb rebootOur docs overhaul is still in process , so thank you for being patient with this
-
@RiveraDn In general, I'd run through the following to get you to what you're used to:
# choose which sku best matches your hardware setup voxl-configure-sku -w # start all services based on the sku you chose in step 1. voxl-configure-mpa # modify voxl-mavlink-server's config file to point to your qgc_ip vi /etc/modalai/voxl-mavlink-server.conf # reboot or power cycle adb rebootOur docs overhaul is still in process , so thank you for being patient with this
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login