Changes regarding px4 commands
-
Heya!
So, I used to rock VOXL2 with the old 0.9.4 Suite. But then I upgraded to the fancy new 1.0.0 Suite. Now I'm trying to figure out how to connect to QGC. Any ideas?
Cheers.@RiveraDn In general, I'd run through the following to get you to what you're used to:
# choose which sku best matches your hardware setup voxl-configure-sku -w # start all services based on the sku you chose in step 1. voxl-configure-mpa # modify voxl-mavlink-server's config file to point to your qgc_ip vi /etc/modalai/voxl-mavlink-server.conf # reboot or power cycle adb rebootOur docs overhaul is still in process , so thank you for being patient with this
-
@RiveraDn In general, I'd run through the following to get you to what you're used to:
# choose which sku best matches your hardware setup voxl-configure-sku -w # start all services based on the sku you chose in step 1. voxl-configure-mpa # modify voxl-mavlink-server's config file to point to your qgc_ip vi /etc/modalai/voxl-mavlink-server.conf # reboot or power cycle adb rebootOur docs overhaul is still in process , so thank you for being patient with this
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login