Telemetry Port on M500
-
Hello, I'm trying to connect a telemetry cable to my FR-SKy receiver to get telemetry on my transmitter. Is there a port I can use for this on the flight core? The connection documentation for the stand alone flight core doesn't match the all in one. Thanks!
-
We recommend 5V off of J1003 pin 1
And then GND and RX off of J1004 pins 3 and 4:
-
This cable can be used for the ones with the server connector:
https://docs.modalai.com/cable-datasheets/#mcbl-00018 -
Thanks! I actually want to send telemetry OUT to the frsky to I get telemetry on my transmitter. I already have the cable:
I have a similar setup on anothe rdrone using a pixhawk.
-
ok, I figured it out, it's J010
Now I see full telemetry on my transmitter
Here is how you enable it:
-
Nice! I didn't know about this. We'll need to propagate to our docs, thanks for the feedback!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login