VOXL2 Development Boards
-
Hey ModalAI team,
My team has been using the VOXL2 and having great results for a standard UAS application. Recently, we've been discussing ideas for some new projects and unique ways that we could incorporate the VOXL2. From looking over the documentation, there's a ton of potential with all the different interfaces that are available on the board to board connectors. However, without spinning a custom PCB it seems like it would be difficult to access most of these since a lot are not accessible with the breakout boards in your catalog.
Is there anything that you have available that can be used to access the signals via standard connectors for benchtop development and prototyping? I'm imagining something similar to the IO boards for Raspberry Pi compute modules.
If not, is this something that your team has considered?
-
Hi, good question. For the low speed connector on VOXL 2, Zybax makes what you are looking for. https://www.zebax.com/index_files/page2540.htm
Last I checked they did not have one for our high-speed connector. We're hoping they make on though. If we can find a contact, we will reach out to them and see if they are going to.
Otherwise, any specific requests? We may have something in the works that will be useful.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login