Heavy Drone Stability Problem.
-
We are building a custom drone and when the VOXL was flying on a smaller version, it was very stable. Transferring the flight controller and recalibrating on a larger drone with a higher center of gravity, the drone crashed. We assume that the default tuning does not account for the cg which is higher on the z-axis. What is the best way to go about minimizing oscillation and increase stability.
Before the crash, on take off, the system began to oscillate in a circular motion. After 8 seconds, the drone then flipped as if it could not balance the heavy batteries on top.
Before we begin a rebuild/redesign of placing the batteries on bottom, what could we do, as far as software and tuning that could potentially help solve this stability problem?
-
Hi Caleb,
All new multirotor vehicles need to go through PID tuning before being safe for flight
Our systems mostly run PX4, so it is definitely recommended to follow the px4 PID tuning guide https://docs.px4.io/v1.12/en/config_mc/pid_tuning_guide_multicopter.html
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login