RB5 Keeps Bricking
-
Hello,
I have an RB5 which I've connected to many times through ADB and SSH. I exited an ADB shell one day, changed no wiring, then a short while later, I tried to open the shell back up using
adb shell, only to find that there were no longer any recognized devices. For a few days, it seemed spotty on whether or not the RB5 would be recognized. Eventually, I couldn't connect at all. After talking through email with a contact from ModalAI, I tried booting into fastboot using these instructions, and I had errors due to /data/modalai and /home/linaro/eeprom/parameters not existing. I was able to get the camera calibration and test file from the ModalAI contact, and I flashed the RB5 successfully.A few minutes later, I was getting ready to start a stream on the RB5 and I ran
adb shell, only to get the error again: No devices/emulators found. I'm now back to before: I can't connect to the RB5 (using the same USB and power block as a few minutes prior when it worked). I also tried the fastboot instructions multiple times, and have not had any success.Does anyone know why I might be unable to connect again?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login