RB5 Incorrect Altitude in QGC
-
Hi there,
I have been noticing that the altimeter in QGroundControl is displaying the wrong data for the RB5 Flight. Moving the drone up by hand and holding it reports a positive number for a brief moment before reporting zero, and moving the drone down and holding it reports a negative number for a brief moment before reporting zero. This makes me think that GQC is actually reporting vertical speed data instead of altitude data, and I tried a sensor calibration through QGC, but the problem still exists. Is there a way to check the pose/vehicle odometry for the RB5 like there was for the VOXL drones? Any help would be appreciated.
Thanks,
John S -
No, I don't believe so. I only have one RB5 in the lab.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login