• Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
  • Register
  • Login
ModalAI Forum
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
    • Register
    • Login

    TX16S Binding Problems

    Sentinel
    2
    4
    427
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      madswamp
      last edited by 11 Apr 2023, 17:12

      Hello, I'm trying to bind my Radiomaster TX16S remote controller to the Sentinel drone.
      After following the quickstart guide instructions, I'm able to put the SPEKTRUM receiver in binding mode via SSH (LED starts blinking), bind the TX16S to the receiver (LED stays on continuously). After this procedure I power cycled the Drone, and it appears that the receiver is still binded with the controller.

      However, opening QGC there is no RC controller connected and when I try to calibrate the controller, the following error appears :
      "Detected 0 radio channels. To operate PX4 you need at least 5 channels".

      I used the following configuration in the remote controller
      "DSM Auto".

      After binding it changed to
      "DSM X 1F".

      Is there any problem with this setup?

      Thank you.

      1 Reply Last reply Reply Quote 0
      • C
        Chad Sweet ModalAI Team
        last edited by 11 Apr 2023, 17:15

        @madswamp said in TX16S Binding Problems:

        Radiomaster TX16S

        Have you asked RadioMaster if they are compatible with Spektrum?

        1 Reply Last reply Reply Quote 0
        • M
          madswamp
          last edited by 11 Apr 2023, 17:25

          According to the TX16S specification, the 4 in 1 transmitter (which I'm using) is compatible with SPEKTRUM DSM2/DSMX. Which is inline with the behavior of the LED on the receiver.

          1 Reply Last reply Reply Quote 0
          • M
            madswamp
            last edited by 11 Apr 2023, 17:41

            Fixed the problem already, had to disable channel mapping in the configurations of the protocol in the controller.

            Thank you.

            1 Reply Last reply Reply Quote 0
            1 out of 4
            • First post
              1/4
              Last post
            Powered by NodeBB | Contributors