Understanding ToF noise under CPU loads
-
Hi, I've been working with the ToF sensor under version 0.8.1 of the camera server. I've noticed that as I request higher FPS, the noise present in the measurements increases. This makes sense to me from an intuitive perspective, without understanding exactly how the PMD measurement algorithm works. However what confuses me is that at a single FPS mark (10FPS for example), noise is minimal when only the camera-server is running, but once I start other services (e.g. voxl-vision-px4), the noise increases. The only explanation I can think of is large CPU loads throttling the clock time for temperature control.
I would like to understand why increased CPU load / temperature causes increased ToF noise. In my mind, only code running on the VOXL would be impacted by CPU load. Is there post-processing code running on the VOXL, and is that code's performance somehow tied to CPU load? Or is the ToF measurement algorithm itself (the code running on the sensor) also somehow affected by a hotter board? Any light you can shed here is appreciated.
-
This doesn't align with anything we have seen. Any chance there is vibration being introduced?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login