How to send MAVSDK commands from Raspberry Pi AI to the M500
-
Hello, I'm trying to configure the MAVLink on my m500 to receive MAVSDK commands from a raspberry pi I have attached to my aircraft running an AI trained to move the vehicle and identify ducks.
The aircraft will travel with a constant altitude, constant roll, and only the thrust and yaw values will change. What do you suggest would be the best method of passing MAVSDK flight
commands from the raspberry pi to the px4. The raspberry pi has a direct connection to the micro-usb port on the VOXL, and I was going to attempt to use that, but I wanted to get some suggestions first.
Any tips would be helpful, thanks! -
Please review the External UDP Mavlink Connection documentation
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login