IR Lock with VOXL m500
-
Hello,
I currently have the IR Lock Sensor shown here: https://irlock.com/collections/ir-markers/products/ir-lock-sensor-precision-landing-kit
It appears to communicate via I2C. I have been looking at the m500 datasheets and am unsure as to how to connect these two devices together.
Please assist.
-
Hi Xeno,
We are not familiar with that sensor. The Flight Core portion of m500 is stock PX4.
You could look at the connectors found on the Flight Core datasheet and see if there is an appropriate connection. Then you could see if PX4 supports that sensor. If it does not, you will need to develop the driver on your own. You can find details on building PX4 for Flight Core on the Flight Core Firmware page
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login