USB Expander V2 Unbrick VOXL-Flight Deck
-
Can someone guide me through the steps to unbrick my VOXL 1 flight deck using the Expansion V2 board. I could not find the V1 board so I just bought the V2 and now I cant find a tutorial to help me unbrick my VOXL.
I have tried pushing the FASTBOOT button while attaching the Power Cable however the board does not respond. I still can not ADB into the device or do the
./installcommand in the latest Firmware folder. Any help would be highly appreciated.
Thank You -
Here you go https://docs.modalai.com/unbrick-voxl/
-
Does the tutorial still work with "VOXL / VOXL 2 USB Expansion Board with Fastboot v2"? I have a different board I was just wondering if the process is the same because in the video they switch to Fasboot mode with a switch the board I have does not have a switch but a button.
-
Yes, it is the same. The v1 had a switch in error, it should have been a button. If you see they have to switch back within a few seconds in the tutorial. Instead, just release the button after a few seconds
-
Thank You, Solved!
-
What do you do if it gets stuck on "[INFO] waiting for device..."?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login