ERROR: failed to initialize IMU0
-
I got new VOXL Flight Deck.
But it seems imu0 is not detected.
voxl-imu-server.conf is default.
Do I need to do any configuration to use IMU0?/ # voxl-list-pipes | grep "imu" imu1 / # journalctl -u voxl-imu-server -- Logs begin at Thu 1970-01-01 00:00:04 UTC, end at Mon 2022-06-27 07:43:07 UT C. -- Jan 01 00:00:07 apq8096 systemd[1]: Starting voxl-imu-server... Jan 01 00:00:09 apq8096 systemd[1]: Started voxl-imu-server. Jan 01 00:00:09 apq8096 voxl-imu-server[2782]: ERROR: imu_detect failed to find a valid part Jan 01 00:00:09 apq8096 voxl-imu-server[2782]: ERROR: failed to initialize IMU0M0019-REV B
-
Do you mind sharing the output of
voxl-imu-server --testandvoxl-versionthanks!VIO can be configured to use either IMU, to select IMU1 just run voxl-configure-qvio and select IMU1 when prompted which to use.
-
voxl:~$ voxl-imu-server --test exising instance of voxl-imu-server found, attempting to stop it ERROR: imu_detect failed to find a valid part detected ICM20948 on spi bus[id] 1 Starting self-test on ICM20948 on SPI bus 1 gyro axis: 0 ratio: 1.009 response: 15858 factory: 15709 offset_dps: -0.97 gyro axis: 1 ratio: 1.012 response: 18092 factory: 17878 offset_dps: -0.08 gyro axis: 2 ratio: 1.004 response: 20218 factory: 20145 offset_dps: -0.22 accl axis: 0 ratio: 0.998 response: 6729 factory: 6742 accl axis: 1 ratio: 1.001 response: 7094 factory: 7086 accl axis: 2 ratio: 1.017 response: 8710 factory: 8561 ================================================================= RESULT FOR IMU0 on SPI BUS 10 GYRO X: FAIL GYRO Y: FAIL GYRO Z: FAIL ACCL X: FAIL ACCL Y: FAIL ACCL Z: FAIL OVERALL FAIL: COULD NOT COMMUNICATE WITH IMU ================================================================= ================================================================= RESULT FOR IMU1 on SPI BUS 1 GYRO X: PASS GYRO Y: PASS GYRO Z: PASS ACCL X: PASS ACCL Y: PASS ACCL Z: PASS OVERALL PASS ================================================================= This self-test required the voxl-imu-server service to stop You can restart it if desired with: systemctl restart voxl-imu-server Exiting Cleanlyvoxl:~$ voxl-version cat: /etc/modalai/voxl-software-bundle-version.txt: No such file or directory -------------------------------------------------------------------------------- system-image: ModalAI 3.6.0 BUILDER: ekatzfey BUILD_TIME: 2022-02-28_23:47 kernel: #1 SMP PREEMPT Mon Feb 28 23:55:47 UTC 2022 3.18.71-perf factory-bundle: 1.0.1 (Yocto installation) -------------------------------------------------------------------------------- architecture: aarch64 processor: apq8096 os: GNU/Linux -------------------------------------------------------------------------------- voxl-suite: Package: voxl-suite Version: 0.5.0 Depends: libjpeg_turbo (>= 9.0.4), libmodal_exposure (>= 0.0.2), libmodal_json (>= 0.3.6), libmodal_pipe (>= 2.1.1), librc_math (>= 1.1.5), libvoxl_cutils (>= 0.0.2), libvoxl_io (>= 0.5.4), mavlink-camera-manager (>= 0.0.2), mongoose (>= 7.3.0), opencv (>= 4.5.2-2), openmp (>= 10.0.2), voxl-camera-calibration (>= 0.1.1), voxl-camera-server (>= 0.8.1), voxl-cpu-monitor (>= 0.2.0), voxl-dfs-server (>= 0.2.2), voxl-docker-support (>= 1.1.3), voxl-gphoto2 (>= 0.0.5), voxl-imu-server (>= 0.9.1), voxl-mavlink (>= 0.0.2), voxl-modem (>= 0.12.0), voxl-mpa-tools (>= 0.3.6), voxl-nodes (>= 0.2.0), voxl-portal (>= 0.1.2), voxl-qvio-server (>= 0.3.4), voxl-streamer (>= 0.2.6), voxl-tag-detector (>= 0.0.2), voxl-tflite (>= 2.2.3), voxl-tflite-server (>= 0.1.5), voxl-utils (>= 0.8.4), voxl-vision-px4 (>= 0.9.5), voxl-vpn (>= 0.0.3) Status: install user installed Section: base Architecture: all Maintainer: james@modalai.com MD5Sum: f55ec020942e92ff12bc137c2aa8d2a5 Size: 1956 Filename: voxl-suite_0.5.0.ipk Description: meta-package for voxl-suite software collection Installed-Time: 1656138820 Package: voxl-suite Version: 0.2.0 Depends: docker, imu_app (= 0.0.6), libvoxl_io (= 0.5.2), voxl-cam-manager (= 0.2.2), voxl-docker-support (= 1.1.1), voxl-hal3-tof-cam-ros (= 0.0.2), voxl-modem (= 0.10.0), voxl-nodes (= 0.0.8), voxl-rtsp (= 1.0.2), voxl-utils (= 0.5.2), voxl-vision-px4 (= 0.6.8), voxl_imu (= 0.0.4), voxl-time-sync (= 0.0.1), voxl-vpn (= 0.0.2), librc_math (= 1.1.2), libmodal_pipe (= 1.2.2), modalai-vl (= 0.1.3) Status: unknown ok not-installed Section: base Architecture: armv7a Maintainer: james@modalai.com MD5Sum: af706cd3c1ea59f274f2ed9b93141f1d Size: 870 Filename: voxl-suite_0.2.0.ipk Description: meta-package to install all of the voxl-suite --------------------------------------------------------------------------------Yes, VIO works if I select IMU1 (default is IMU0).
I flashed system image to 3.6.0 (preserve the /data/ parition).
I didn't confirm whether IMU0 was working at 3.3.0.
If necessary, I can re-install 3.3.0 and check again. -
@James-Strawson Could you please check the outputs?
I want to know whether this is hardware issue or configuration issue. -
I flashed system image v3.3.0.
But imu0 still doesn't work./ # voxl-imu-server --test exising instance of voxl-imu-server found, attempting to stop it ERROR: imu_detect failed to find a valid part detected ICM20948 on spi bus[id] 1 Starting self-test on ICM20948 on SPI bus 1 gyro axis: 0 ratio: 1.009 response: 15851 factory: 15709 offset_dps: -0.92 gyro axis: 1 ratio: 1.010 response: 18051 factory: 17878 offset_dps: -0.08 gyro axis: 2 ratio: 1.003 response: 20198 factory: 20145 offset_dps: -0.17 accl axis: 0 ratio: 0.997 response: 6724 factory: 6742 accl axis: 1 ratio: 1.009 response: 7151 factory: 7086 accl axis: 2 ratio: 1.001 response: 8572 factory: 8561 ================================================================= RESULT FOR IMU0 on SPI BUS 10 GYRO X: FAIL GYRO Y: FAIL GYRO Z: FAIL ACCL X: FAIL ACCL Y: FAIL ACCL Z: FAIL OVERALL FAIL: COULD NOT COMMUNICATE WITH IMU ================================================================= ================================================================= RESULT FOR IMU1 on SPI BUS 1 GYRO X: PASS GYRO Y: PASS GYRO Z: PASS ACCL X: PASS ACCL Y: PASS ACCL Z: PASS OVERALL PASS ================================================================= This self-test required the voxl-imu-server service to stop You can restart it if desired with: systemctl restart voxl-imu-server Exiting Cleanly / # voxl-version cat: /etc/modalai/voxl-software-bundle-version.txt: No such file or directory -------------------------------------------------------------------------------- system-image: ModalAI 3.3.0 BUILDER: ekatzfey BUILD_TIME: 2021-06-06_19:28 kernel: #1 SMP PREEMPT Sun Jun 6 19:41:01 UTC 2021 3.18.71-perf factory-bundle: 1.0.1 (Yocto installation) -------------------------------------------------------------------------------- architecture: aarch64 processor: apq8096 os: GNU/Linux -------------------------------------------------------------------------------- voxl-suite: Package: voxl-suite Version: 0.5.0 Depends: libjpeg_turbo (>= 9.0.4), libmodal_exposure (>= 0.0.2), libmodal_json (>= 0.3.6), libmodal_pipe (>= 2.1.1), librc_math (>= 1.1.5), libvoxl_cutils (>= 0.0.2), libvoxl_io (>= 0.5.4), mavlink-camera-manager (>= 0.0.2), mongoose (>= 7.3.0), opencv (>= 4.5.2-2), openmp (>= 10.0.2), voxl-camera-calibration (>= 0.1.1), voxl-camera-server (>= 0.8.1), voxl-cpu-monitor (>= 0.2.0), voxl-dfs-server (>= 0.2.2), voxl-docker-support (>= 1.1.3), voxl-gphoto2 (>= 0.0.5), voxl-imu-server (>= 0.9.1), voxl-mavlink (>= 0.0.2), voxl-modem (>= 0.12.0), voxl-mpa-tools (>= 0.3.6), voxl-nodes (>= 0.2.0), voxl-portal (>= 0.1.2), voxl-qvio-server (>= 0.3.4), voxl-streamer (>= 0.2.6), voxl-tag-detector (>= 0.0.2), voxl-tflite (>= 2.2.3), voxl-tflite-server (>= 0.1.5), voxl-utils (>= 0.8.4), voxl-vision-px4 (>= 0.9.5), voxl-vpn (>= 0.0.3) Status: install user installed Architecture: all Installed-Time: 218 -------------------------------------------------------------------------------- -
@James-Strawson
Hello,
When I upgrade to v3.8, voxl-imu-server no longer starts.
I think imu0 is not available, it is an initial defect.root@apq8096:~# voxl-version -------------------------------------------------------------------------------- system-image: 3.8.0 kernel: #1 SMP PREEMPT Tue Apr 26 18:08:39 UTC 2022 3.18.71-perf -------------------------------------------------------------------------------- hw version: VOXL -------------------------------------------------------------------------------- voxl-suite: 0.7.0 -------------------------------------------------------------------------------- root@apq8096:~# voxl-imu-server --test ERROR: imu_detect failed to find a valid part detected ICM20948 on spi bus[id] 1 Starting self-test on ICM20948 on SPI bus 1 received SIGINT Ctrl-C gyro axis: 0 ratio: 1.012 response: 15893 factory: 15709 offset_dps: -0.99 gyro axis: 1 ratio: 1.013 response: 18108 factory: 17878 offset_dps: -0.10 gyro axis: 2 ratio: 1.005 response: 20253 factory: 20145 offset_dps: -0.18 accl axis: 0 ratio: 0.999 response: 6735 factory: 6742 accl axis: 1 ratio: 1.008 response: 7146 factory: 7086 accl axis: 2 ratio: 1.000 response: 8562 factory: 8561 ================================================================= RESULT FOR IMU0 on SPI BUS 10 GYRO X: FAIL GYRO Y: FAIL GYRO Z: FAIL ACCL X: FAIL ACCL Y: FAIL ACCL Z: FAIL OVERALL FAIL: COULD NOT COMMUNICATE WITH IMU ================================================================= ================================================================= RESULT FOR IMU1 on SPI BUS 1 GYRO X: PASS GYRO Y: PASS GYRO Z: PASS ACCL X: PASS ACCL Y: PASS ACCL Z: PASS OVERALL PASS ================================================================= This self-test required the voxl-imu-server service to stop You can restart it if desired with: systemctl restart voxl-imu-server Exiting Cleanly root@apq8096:~# voxl-inspect-services Service Name | Enabled | Running | CPU Usage --------------------------------------------------------------- docker-autorun | Disabled | Not Running | docker-daemon | Disabled | Not Running | modallink-relink | Disabled | Not Running | voxl-camera-server | Enabled | Running | 4.9 voxl-cpu-monitor | Enabled | Running | 0.0 voxl-dfs-server | Disabled | Not Running | voxl-imu-server | Enabled | Not Running | voxl-mavlink-server | Enabled | Running | 0.0 voxl-modem | Disabled | Not Running | voxl-portal | Enabled | Running | 0.0 voxl-qvio-server | Enabled | Running | 0.0 voxl-streamer | Disabled | Not Running | voxl-tag-detector | Disabled | Not Running | voxl-tflite-server | Disabled | Not Running | voxl-time-sync | Disabled | Not Running | voxl-vision-px4 | Enabled | Running | 0.0 voxl-wait-for-fs | Enabled | Completed |The log showed that the service was stuck in a restart loop due to "Service hold-off time over, scheduling restart".
root@apq8096:~# journalctl -u voxl-imu-server -- Logs begin at Thu 1970-01-01 00:34:23 UTC, end at Mon 2022-08-22 06:05:16 UTC. -- Jan 01 00:34:27 apq8096 systemd[1]: Starting voxl-imu-server... Jan 01 00:34:29 apq8096 systemd[1]: Started voxl-imu-server. Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ERROR: imu_detect failed to find a valid part Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ERROR in imu_detect_board detecting imu0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: loading calibration file Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU0: Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU1: Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU2: Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU3: Jan 01 00:34:29 apq8096 systemd[1]: [[1;39mvoxl-imu-server.service: Main process exited, code=exited, status=255/n/a[[0 m Jan 01 00:34:29 apq8096 systemd[1]: [[1;39mvoxl-imu-server.service: Unit entered failed state.[[0m Jan 01 00:34:29 apq8096 systemd[1]: [[1;39mvoxl-imu-server.service: Failed with result 'exit-code'.[[0m Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: loading config file Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_enable: 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_bus: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_rotate_common_frame 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_enable: 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_bus: 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_rotate_common_frame 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_enable: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_spi_bus: 9 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_enable: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_spi_bus: 11 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 systemd[1]: voxl-imu-server.service: Service hold-off time over, scheduling restart. Jan 01 00:34:29 apq8096 systemd[1]: Stopped voxl-imu-server. Jan 01 00:34:29 apq8096 systemd[1]: Starting voxl-imu-server... -
@James-Strawson
Hello,
When I upgrade to v3.8, voxl-imu-server no longer starts.
I think imu0 is not available, it is an initial defect.root@apq8096:~# voxl-version -------------------------------------------------------------------------------- system-image: 3.8.0 kernel: #1 SMP PREEMPT Tue Apr 26 18:08:39 UTC 2022 3.18.71-perf -------------------------------------------------------------------------------- hw version: VOXL -------------------------------------------------------------------------------- voxl-suite: 0.7.0 -------------------------------------------------------------------------------- root@apq8096:~# voxl-imu-server --test ERROR: imu_detect failed to find a valid part detected ICM20948 on spi bus[id] 1 Starting self-test on ICM20948 on SPI bus 1 received SIGINT Ctrl-C gyro axis: 0 ratio: 1.012 response: 15893 factory: 15709 offset_dps: -0.99 gyro axis: 1 ratio: 1.013 response: 18108 factory: 17878 offset_dps: -0.10 gyro axis: 2 ratio: 1.005 response: 20253 factory: 20145 offset_dps: -0.18 accl axis: 0 ratio: 0.999 response: 6735 factory: 6742 accl axis: 1 ratio: 1.008 response: 7146 factory: 7086 accl axis: 2 ratio: 1.000 response: 8562 factory: 8561 ================================================================= RESULT FOR IMU0 on SPI BUS 10 GYRO X: FAIL GYRO Y: FAIL GYRO Z: FAIL ACCL X: FAIL ACCL Y: FAIL ACCL Z: FAIL OVERALL FAIL: COULD NOT COMMUNICATE WITH IMU ================================================================= ================================================================= RESULT FOR IMU1 on SPI BUS 1 GYRO X: PASS GYRO Y: PASS GYRO Z: PASS ACCL X: PASS ACCL Y: PASS ACCL Z: PASS OVERALL PASS ================================================================= This self-test required the voxl-imu-server service to stop You can restart it if desired with: systemctl restart voxl-imu-server Exiting Cleanly root@apq8096:~# voxl-inspect-services Service Name | Enabled | Running | CPU Usage --------------------------------------------------------------- docker-autorun | Disabled | Not Running | docker-daemon | Disabled | Not Running | modallink-relink | Disabled | Not Running | voxl-camera-server | Enabled | Running | 4.9 voxl-cpu-monitor | Enabled | Running | 0.0 voxl-dfs-server | Disabled | Not Running | voxl-imu-server | Enabled | Not Running | voxl-mavlink-server | Enabled | Running | 0.0 voxl-modem | Disabled | Not Running | voxl-portal | Enabled | Running | 0.0 voxl-qvio-server | Enabled | Running | 0.0 voxl-streamer | Disabled | Not Running | voxl-tag-detector | Disabled | Not Running | voxl-tflite-server | Disabled | Not Running | voxl-time-sync | Disabled | Not Running | voxl-vision-px4 | Enabled | Running | 0.0 voxl-wait-for-fs | Enabled | Completed |The log showed that the service was stuck in a restart loop due to "Service hold-off time over, scheduling restart".
root@apq8096:~# journalctl -u voxl-imu-server -- Logs begin at Thu 1970-01-01 00:34:23 UTC, end at Mon 2022-08-22 06:05:16 UTC. -- Jan 01 00:34:27 apq8096 systemd[1]: Starting voxl-imu-server... Jan 01 00:34:29 apq8096 systemd[1]: Started voxl-imu-server. Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ERROR: imu_detect failed to find a valid part Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ERROR in imu_detect_board detecting imu0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: loading calibration file Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU0: Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU1: Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU2: Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: calibration for IMU3: Jan 01 00:34:29 apq8096 systemd[1]: [[1;39mvoxl-imu-server.service: Main process exited, code=exited, status=255/n/a[[0 m Jan 01 00:34:29 apq8096 systemd[1]: [[1;39mvoxl-imu-server.service: Unit entered failed state.[[0m Jan 01 00:34:29 apq8096 systemd[1]: [[1;39mvoxl-imu-server.service: Failed with result 'exit-code'.[[0m Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Gyro Offsets (rad/s): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Offsets (m/s^2): X: 0.000 Y: 0.000 Z: 0.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: Accl Scale : X: 1.000 Y: 1.000 Z: 1.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_baseline_temp: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_baseline_temp (C): 30.000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: has_temp_cal: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: gyro_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: X: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Y: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: accl_drift_coeff: Z: 0.000000 0.000000 0.000000 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: loading config file Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_enable: 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_bus: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_rotate_common_frame 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu0_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_enable: 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_bus: 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_rotate_common_frame 1 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: imu1_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_enable: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_spi_bus: 9 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_enable: 0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_spi_bus: 11 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_sample_rate_hz: 1000.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_lp_cutoff_freq_hz: 92.0 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: aux_imu2_read_every_n_samples: 10 Jan 01 00:34:29 apq8096 voxl-imu-server[2894]: ================================================================= Jan 01 00:34:29 apq8096 systemd[1]: voxl-imu-server.service: Service hold-off time over, scheduling restart. Jan 01 00:34:29 apq8096 systemd[1]: Stopped voxl-imu-server. Jan 01 00:34:29 apq8096 systemd[1]: Starting voxl-imu-server... -
@stevedan Couldn't find the way to solve so we sent back to ModalAI with RMA.
I wonder what was the issue of this.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login