M0065 module

[Tamas Pal 0]

Where can I get the M0065 module and jst connector cable for that?
https://docs.modalai.com/voxl2-io-user-guide/#rc-connections

[Chad Sweet]

Hi Tamas, please find link to VOXL 2 I/O here: https://www.modalai.com/products/voxl2-io

It is still in beta, so not everything is 100% supported yet. You'll need to use the voxl-dev branch of our PX4 repo for instance. https://docs.modalai.com/voxl2-px4-developer-guide

We are working on supporting to full production in our next SDK release.

[Tamas Pal 0]

@Chad-Sweet Can I use any generic esc and rc receiver with it ? is the jst connector available with it to connect it with voxl 2 J19 jst port? If not please share the link for the jst connector cable also

[modaltb]

@Tamas-Pal-0 , we're feeling out the cable requirements from users currently. Do you also need the external GPS/mag? This is also on that J19 port. At the cost of density to pay for size, we've had to put a few interfaces on that 12 pin JST which makes a few options here.

[Tamas Pal 0]

Right now I don't want to use gps module. So where to get the J19 port cable ? And can I use PWM output cable and breakout board with M0065 J1 port ?
https://www.modalai.com/products/flight-core-pwm-output-cable-and-break-out-board

[modaltb]

@Tamas-Pal-0 we're making this cable to order you are the first one, what kind of length do you want? I'll provide a link when it's posted, it will be called MCBL-00061

As a heads up, you can get the parts here too, which might be faster/cheaper, but we'll make cables for kits as requested (and feasible):
https://www.digikey.com/en/products/detail/jst-sales-america-inc/GHR-12V-S/807824
https://www.digikey.com/en/products/detail/jst-sales-america-inc/GHR-04V-S/807816
https://www.digikey.com/en/products/detail/jst-sales-america-inc/AGHGH28K152/6009449

[modaltb]

And yes for PWM output --> https://www.modalai.com/products/flight-core-pwm-output-cable-and-break-out-board