voxl-vision-px4 not working
-
Hi,
We noticed that on our VOXL, voxl-vision-px4 isn't running.
When we try to configure mpa, the following error is raised:
Also, in /data, there is no folder named /modalai.
How can we fix this?
Thanks in advance!
-
Hi,
What version of the software stack is your drone running? Can you post the output of
voxl-versionandvoxl-inspect-services. Also, can you paste the full log from VVPX4 withjournalctl -u voxl-vision-px4. Finally, did you recently reflash the drone? All of our drones shipped within the last year and a half or so should have a factory mode saved in that data directory, which shouldn't get overwritten unless you're reflashing the drone (and choose to wipe it since we can reflash without wiping the data partition). -
Hi @Alex-Gardner,
We recently flashed the voxl to 3.8.0. When we noticed voxl-vision-px4 we reflashed it again with and without wipe, to see if that would resolve it.
Outputs:
voxl-version
voxl-inspect-services
journalctl -u voxl-vision-px4
Thanks in advance!
-
Hi @Alex-Gardner,
We resolved the issue using this forumpost:
https://forum.modalai.com/topic/1050/position-flight-is-not-available-after-firmware-update?_=1658251944919Thanks for the help
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login