libxslt and libxml with Python

[SHofmeester]

Hi @Eric-Katzfey,
I have the same problem as MattO.
How can I build and install libxslt myself?
Do I have to make a .ipk file of the libxslt repository, push it to the Voxl and then "opkg install"?
How can I make a .ipk file that can be installed?
Or is there another way to install it?

Thanks in advance

[Eric Katzfey]

@SHofmeester You can build it in the voxl-emulator and then make an ipk package that you can install on target with opkg.

[SHofmeester]

Hi @Eric-Katzfey,

Thank you for your reply.
I was able to build the libxslt library with voxl-emulator, with ./autogen.sh, make and ./configure. And I was also able to make an .ipk with control.tar.gz., data.tar.gz and debian-binary, with a online tutorial.
But when I push it to the Voxl and try to opkg install it, it says: "unrecognized archive format" and "failed to extract control.tar.gz".

I tried to copy the file structure and contents of the control file from the Voxl-libraries. But I don't understand what should be in the data directory, what shouldn't and what the format should be.

How can I make an .ipk file with the right format to install libxslt with opkg?

[Eric Katzfey]

@SHofmeester What do you have for the Architecture: in the control file for the package? If you use all it should work.

[SHofmeester]

@Eric-Katzfey
Thank you, I was able to opkg install libslt-dev on VOXL (I also had to use "ar x" to create the .ipk-file, like you do in your make_package.sh, instead of "tar", like on online tutorials)

Another dependency of lxml is python3-dev. How can I opkg install that on the VOXL? Because I can't find a repository to put in the data-folder of the .ipk-file.

[tom]

@SHofmeester This repo hasn't been touched in quite a while so I can't guarantee that it will work perfectly, but this was used to build / install Python3 on VOXL in the past: https://gitlab.com/voxl-public/support/voxl-python-3.6.9

[SHofmeester]

Hi @tom, thank you for your reply, but that isn't exactly what I meant.
I built/installed python3 on the VOXL and it works well.
But for pymavlink I need: python3-dev (and also libxslt-dev and libxml2-dev, but I built/installed those myself on the VOXL).
For reference (below "On Linux"): https://github.com/ArduPilot/pymavlink/blob/master/README.md

Is there a python3-dev repository I can use for the data of the .ipk-file?
Do I need to add that package to the image and then reflash it (https://docs.modalai.com/voxl-system-image/)? If so, what are the main steps to do that?
Isn't there a way to use apt-get?

[Chad Sweet]

We don't have much familiarity with supporting Python. It might make most sense to use Ubuntu on Docker . That way you can apt-get the packages you need. You can access libmodal_pipe as well from that Docker.

[SHofmeester]

Hi @Chad-Sweet, thank you, I was able to install pymavlink, and all the dependencies using apt-get, on the docker on the VOXL.

How can I access libmodal_pipe from the docker?
Can I access it using UDP (that is what pymavlink uses)?
And how can I get the data from the flight controller, for example if it is armed or not?

Then I can use pymavlink to get the data from the flight controller inside the docker and then send it outside the docker, so I can use all the VOXL libraries and functionalities.

[Eric Katzfey]

@SHofmeester There is some introductory material about libmodal_pipe in our documentation here: https://docs.modalai.com/voxl-sdk/