Replace stock VOXL2 on Starling 2 Max with fresh VOXL2
-
When operating the Starling 2 MAX , I am curious if there is a known guide on replacing the VOXL2 that comes with the Starling 2 MAX with a VOXL2 fresh from Modal AI.
What software / hardware mods need to be made in order to successfully fly the system once a new VOXL2 system has been installed ?
-
When operating the Starling 2 MAX , I am curious if there is a known guide on replacing the VOXL2 that comes with the Starling 2 MAX with a VOXL2 fresh from Modal AI.
What software / hardware mods need to be made in order to successfully fly the system once a new VOXL2 system has been installed ?
@AndrewC , sorry for the delay.
There are no hardware modifications to VOXL2 before installing it into Starling 2 Max. You would just need to configure SKU on your new VOXL2 board (https://docs.modalai.com/sku/) and just just reflash the latest SDK to start off clean. During the SDK install, there are a few steps (voxl-configure-mpa) that will load all the needed configurations for your SKU.
Please let us know if you have any issues with that.
Alex
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login