voxl-io-server won't run
-
Hello Modal AI team,
I am trying to enable and run voxl-io-server. I was successfully able to enable it but when starting the system, it would not run. I ran into this error when I asked for its status
voxl2:/$ systemctl status voxl-io-server
● voxl-io-server.service - voxl-io-server
Loaded: loaded (/usr/bin/voxl-io-server; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2025-07-14 14:19:26 UTC; 25ms ago
Process: 2571 ExecStart=/usr/bin/voxl-io-server (code=exited, status=255)
Main PID: 2571 (code=exited, status=255)Jul 14 14:19:26 m0054 systemd[1]: Started voxl-io-server.
Jul 14 14:19:26 m0054 voxl-io-server[2571]: no config file found, please run voxl-configure-rangefinders
Jul 14 14:19:26 m0054 systemd[1]: voxl-io-server.service: Main process exited, code=exited, status=255/n/a
Jul 14 14:19:26 m0054 systemd[1]: voxl-io-server.service: Failed with result 'exit-code'. -
Hello Modal AI team,
I am trying to enable and run voxl-io-server. I was successfully able to enable it but when starting the system, it would not run. I ran into this error when I asked for its status
voxl2:/$ systemctl status voxl-io-server
● voxl-io-server.service - voxl-io-server
Loaded: loaded (/usr/bin/voxl-io-server; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2025-07-14 14:19:26 UTC; 25ms ago
Process: 2571 ExecStart=/usr/bin/voxl-io-server (code=exited, status=255)
Main PID: 2571 (code=exited, status=255)Jul 14 14:19:26 m0054 systemd[1]: Started voxl-io-server.
Jul 14 14:19:26 m0054 voxl-io-server[2571]: no config file found, please run voxl-configure-rangefinders
Jul 14 14:19:26 m0054 systemd[1]: voxl-io-server.service: Main process exited, code=exited, status=255/n/a
Jul 14 14:19:26 m0054 systemd[1]: voxl-io-server.service: Failed with result 'exit-code'.@tonygurney said in voxl-io-server won't run:
no config file found, please run voxl-configure-rangefinders
Did you try running
voxl-configure-rangefinders? -
@tonygurney said in voxl-io-server won't run:
no config file found, please run voxl-configure-rangefinders
Did you try running
voxl-configure-rangefinders?Did you try running
voxl-configure-rangefinders?Yes I have, and these are the outputs:
voxl2:/$ voxl-configure-rangefinders
missing required argumentStart wizard with prompts:
voxl-configure-rangefindersShortcut configuration arguments for scripted setup.
factory_enable will reset the config file to factory defaults
before enabling the service.voxl-configure-rangefinders disable
voxl-configure-rangefinders 1_on_m0141
voxl-configure-rangefinders 1_downward_on_m0141
voxl-configure-rangefinders 4_on_m0141
voxl-configure-rangefinders 1_downward_on_m0173
voxl-configure-rangefinders enable1_downward_on_m0141 is for a downward sensor, this enables mavlink
broadcast to the autopilot as a landing sensorshow this help message:
voxl-configure-rangefinders helpis there a certain option I should select?
-
Did you try running
voxl-configure-rangefinders?Yes I have, and these are the outputs:
voxl2:/$ voxl-configure-rangefinders
missing required argumentStart wizard with prompts:
voxl-configure-rangefindersShortcut configuration arguments for scripted setup.
factory_enable will reset the config file to factory defaults
before enabling the service.voxl-configure-rangefinders disable
voxl-configure-rangefinders 1_on_m0141
voxl-configure-rangefinders 1_downward_on_m0141
voxl-configure-rangefinders 4_on_m0141
voxl-configure-rangefinders 1_downward_on_m0173
voxl-configure-rangefinders enable1_downward_on_m0141 is for a downward sensor, this enables mavlink
broadcast to the autopilot as a landing sensorshow this help message:
voxl-configure-rangefinders helpis there a certain option I should select?
@tonygurney What are you trying to accomplish with voxl-io-server?
-
@tonygurney What are you trying to accomplish with voxl-io-server?
@Eric-Katzfey I figured out that I did not need it for my project, Thank you thought!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login