• Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
  • Register
  • Login
ModalAI Forum
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
    • Register
    • Login

    VOXL 2 not booting

    VOXL 2
    voxl2 camera module
    2
    2
    157
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • V
      voxl-phoenix
      last edited by voxl-phoenix 25 Mar 2025, 01:06 25 Mar 2025, 01:06

      I'm using VOXL2 I have connected the coax board to the voxl . when I screw the board on the drone firmly. the voxl boots up and works fine but I loose connection often. when I unscrew the voxl 2 and try to boot it. it doesn't boot. I have tried installing new SDK and downgrading it. no affect.
      this behaviour is very weard I can't understand what is going on and what could be the reason.WhatsApp Image 2025-03-25 at 01.05.03.jpeg

      A 1 Reply Last reply 9 Apr 2025, 03:41 Reply Quote 0
      • A
        Alex Kushleyev ModalAI Team @voxl-phoenix
        last edited by Alex Kushleyev 9 Apr 2025, 03:41 9 Apr 2025, 03:41

        @voxl-phoenix , this may be a hardware issue because VOXL2 will boot just fine without M0173 camera front end plugged in (if the hardware is OK). It is possible that one of the camera connectors (where M0173 plugs in) has broken off or is loose, causing a hardware failure. If you would like a better diagnosis, please share a video of the voxl2 not booting, so we can see the LEDs (i realize there are green leds on top and bottom, but the way your image shows, you can see both of them. Also, in this non-booting state, does the VOXL2 show up as any USB device when plugged into a linux machine using the main USB C connector?

        Alex

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Powered by NodeBB | Contributors