Cannot connect with controller after software update
-
Recently upgraded from 1.3.5 to 1.4.1 on our Starling 2 Max drones, but now it seems that they cannot connect with their controllers. Are there any updates or configurations that need to be done with the controllers as well?
-
Recently upgraded from 1.3.5 to 1.4.1 on our Starling 2 Max drones, but now it seems that they cannot connect with their controllers. Are there any updates or configurations that need to be done with the controllers as well?
-
@kestrelsystemsbp Which transmitter / receiver combo are you using? It's possible the firmware was updated and it requires them to be re-bound
-
@tom The controller uses LoRa/FLRC
-
@kestrelsystemsbp Interesting, can you send the info of what receiver and transmitter you're using?
-
@tom I am not entirely sure how I check that
-
@kestrelsystemsbp Well you say you're using LORA which is not something starling ships with so I'm wondering if you put custom hardware on there
@tom It's okay, I managed to figure it out. Just had to change the RC protocol in the px4-conf file.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login