VOXL2-MINI Serial Pin Mapping for Ardupilot
-
Re: ArduPilot on Voxl2
Hi,Which pins on the J19 connector of the VOXL2-Mini are mapped to ArduPilot's SERIALx ports?
For the VOXL2-Mini J19 connector, one of the UART connections (pins 7 and
is reserved for PWM signals. With pins 2 and 3 dedicated to GPS, which ArduPilot SERIALx port does that correspond to? Additionally, which SERIALx port is mapped to pins 10 and 11?Best regards,
Tom -
Re: ArduPilot on Voxl2
Hi,Which pins on the J19 connector of the VOXL2-Mini are mapped to ArduPilot's SERIALx ports?
For the VOXL2-Mini J19 connector, one of the UART connections (pins 7 and
is reserved for PWM signals. With pins 2 and 3 dedicated to GPS, which ArduPilot SERIALx port does that correspond to? Additionally, which SERIALx port is mapped to pins 10 and 11?Best regards,
Tom@TomP GPS on pins 2 and 3 is mapped to serial port 3 in ArduPilot. The RC port on pins 10 and 11 is mapped to 4. https://github.com/ArduPilot/ardupilot/blob/d977f318c68faf69b8afa9b5c1afe73932a1d946/libraries/AP_HAL_QURT/HAL_QURT_Class.cpp#L50
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login