voxl-open-vins-server???
-
I have a question.
I am currently using VOXL2 with SDK 1.4.1 and utilizing dual tracking with the M0173 module. Since I am only flying indoors, I have not attached a GPS module.I am using
voxl-open-vins-server, but I noticed that the documentation and the configuration file contents forvoxl-open-vins-serverare different.Could you provide a summary of the correct
voxl-open-vins-serversetup for SDK 1.4.1? -
voxl-openvins-server is under rapid development at the moment and I expect the entire configuration file to be cleaned up dramatically quite soon. After that point the configuration file contents will stabilize and we will update the documentation to match. Fully documenting the current state would be a wasted effort.
It should not be necessary to modify the configuration file. When flashing the 1.4.1 SDK a new default config file will have been made. What differs from drone-to-drone is the physical layout of the cameras and IMU which is defined by /etc/modalai/extrinsics.conf as well as the cameras that should be used for vio which is set up in /etc/modalai/vio_cams.conf
-
voxl-openvins-server is under rapid development at the moment and I expect the entire configuration file to be cleaned up dramatically quite soon. After that point the configuration file contents will stabilize and we will update the documentation to match. Fully documenting the current state would be a wasted effort.
It should not be necessary to modify the configuration file. When flashing the 1.4.1 SDK a new default config file will have been made. What differs from drone-to-drone is the physical layout of the cameras and IMU which is defined by /etc/modalai/extrinsics.conf as well as the cameras that should be used for vio which is set up in /etc/modalai/vio_cams.conf
@James-Strawson
"takeoff_cam": Tells OpenVINS which camera to use for takeoff. This should be a camera where "is_occluded_on_ground" is set to false in vio_cams.conf. Besides this setting, what else needs to be configured?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login