Voxl2 Volume Full
-
Good day,
working with a new voxl2 platform. I tried to update the SDK from 1.1.3 to 1.2.0 and during the update it froze and became unresponsive.
I Power cycled the voxl2 and it was unrecognized by the computer via ADB and I assume into a "bricked" state.
I went ahead and preformed the unbricking procedure and had a positive result.
I am now working to reupload the SDK and while attempting it fails due to Volume Full.
How do i clear space on the Voxl2 to be able to upload the newest SDK?
-
Good day,
working with a new voxl2 platform. I tried to update the SDK from 1.1.3 to 1.2.0 and during the update it froze and became unresponsive.
I Power cycled the voxl2 and it was unrecognized by the computer via ADB and I assume into a "bricked" state.
I went ahead and preformed the unbricking procedure and had a positive result.
I am now working to reupload the SDK and while attempting it fails due to Volume Full.
How do i clear space on the Voxl2 to be able to upload the newest SDK?
-
@Stefan-Amundarain Please try flashing using the
./install.sh -woption@tom thank you! Worked like a charm. Much appreciated!
-
@tom thank you! Worked like a charm. Much appreciated!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login