Unable to retrieve full set of parameters Voxl2 -> QgroundControl
-
Hello guys,
I just reinstalled from scratch the SDK and the operating system of my voxl2 (from flashing the firmware to SDK 1.2). I can access the voxl2 portal, seeing cameras and similar. However, when I try to configure my UAV using QGroundControl, it is very slow to download the parameter list (20% of package loss rate). However, when it finished I had the error: Unable to retrieve the full set of parameters.
Sadly, in this state, I cannot access the configuration options of Qground (ie. RC configuration, flight mode and similar).
Where I am wrong? Before reinstalling everything, Qground was working!Thanks,
-
Hello guys,
I just reinstalled from scratch the SDK and the operating system of my voxl2 (from flashing the firmware to SDK 1.2). I can access the voxl2 portal, seeing cameras and similar. However, when I try to configure my UAV using QGroundControl, it is very slow to download the parameter list (20% of package loss rate). However, when it finished I had the error: Unable to retrieve the full set of parameters.
Sadly, in this state, I cannot access the configuration options of Qground (ie. RC configuration, flight mode and similar).
Where I am wrong? Before reinstalling everything, Qground was working!Thanks,
-
@jocacace13 It sounds like you have a weak network connection between voxl2 and your host machine.
@tom Thanks for the reply. I thought the same at the start. I also tried connecting with the ethernet cable, and the results were the same. Do you mind if any other issues can cause the same behaviour?
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login