FlightCore V2/RaspberryPi
-
All,
I'm undertaking a drone project, and the entire VOXL was a little out of my price range. I purchased the flight core V2, and would like to use a raspberry pi 4 with a cellular sim hat on it. So I would want to connect to the aircraft via 5G connection and control the flight controller through that connection. Does anyone have any thoughts or ideas or experience on how this can be accomplished?
-
All,
I'm undertaking a drone project, and the entire VOXL was a little out of my price range. I purchased the flight core V2, and would like to use a raspberry pi 4 with a cellular sim hat on it. So I would want to connect to the aircraft via 5G connection and control the flight controller through that connection. Does anyone have any thoughts or ideas or experience on how this can be accomplished?
-
@Jw0719 We can't help too much but it would likely be similar to this: https://docs.px4.io/main/en/companion_computer/pixhawk_rpi.html but swapping the pixhawk for flight core
-
@tom I appreciate the help. My only other question would be which port on the Flight Core V2 would be best to connect the companion computer to? still the telem port? I for some reason had assumed the USB port would be best.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login